Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
version [2018/08/03 13:27]
127.0.0.1 外部编辑
version [2019/03/10 22:27] (current)
Line 46: Line 46:
   ​   ​
 <code bash> <code bash>
-  ​Widora by mango,V1.0.7                                                          ​ +Widora by mango,V1.0.8 
-                                                                                 + 
-  Board: Ralink APSoC DRAM:  128 MB                                               ​ +Board: Ralink APSoC DRAM:  128 MB 
-  relocate_code Pointer at: 87fb4000 ​                                              +relocate_code Pointer at: 87fb4000 
-  ​*********************** ​                                                         +flash manufacture id: ef, device id 40 19 
-  Watchdog Reset Occurred ​                                                         +find flash: ​W25Q256FV 
-  *********************** ​                                                         +*** Warning - bad CRC, using default environment 
-  ​flash manufacture id: c2, device id 20 18                                        + 
-  find flash: ​MX25L12805D ​                                                         +============================================  
-  *** Warning - bad CRC, using default environment ​                                +Ralink UBoot Version: 4.3.0.0 
-                                                                                 +--------------------------------------------  
-  ============================================ ​                                    +ASIC 7628_MP (Port5<​->​None) 
-  Ralink UBoot Version: 4.3.0.0 ​                                                  ​ +DRAM component: 1024 Mbits DDR, width 16 
-  -------------------------------------------- ​                                    +DRAM bus: 16 bit 
-  ASIC 7628_MP (Port5<​->​None) ​                                                    ​ +Total memory: 128 MBytes 
-  DRAM component: 1024 Mbits DDR, width 16                                         +Flash component: SPI Flash 
-  DRAM bus: 16 bit                                                                 +Date:Jun 12 2018  Time:15:16:26 
-  Total memory: 128 MBytes ​                                                        +============================================  
-  Flash component: SPI Flash                                                       +icache: sets:512, ways:4, linesz:32 ,​total:​65536 
-  Date:Dec 26 2017  Time:20:59:50                                                  +dcache: sets:256, ways:4, linesz:32 ,​total:​32768  
-  ============================================ ​                                    + 
-  icache: sets:512, ways:4, linesz:32 ,​total:​65536 ​                                + ##### The CPU freq = 580 MHZ ####  
-  dcache: sets:256, ways:4, linesz:32 ,​total:​32768 ​                                + ​estimate memory size =128 Mbytes 
-                                                                                 +RESET MT7628 PHY!!!!!! ​ONLY 0 
-   ​##### The CPU freq = 580 MHZ ####                                               +MT7688 gpio init : wled and wdt by mango 
-   ​estimate memory size =128 Mbytes ​                                              ​ + 
-  RESET MT7628 PHY!!!!!!MT7688 gpio init : wled and wdt by mango                                                                                     +if you press the WPS button will automatically enter the Update mode 
-                                                                                 + 
-  if you press the WPS button will automatically enter the Update mode             +
-                                                                                 +1 
-                                                                                ​ +2 
-  * +
-  * +
-  ​* ​                                                                             ​ +
-                                                                                ​ +
-  Please choose the operation: ​                                                    +
-   1: Load system code to SDRAM via TFTP.                                       ​ +8 
-   2: Load system code then write to Flash via TFTP.                             +
-   3: Boot system code via Flash (default). ​                                    ​ +Please choose the operation:  
-   4: Entr boot command line interface. ​                                        ​ +   1: Load system code to SDRAM via TFTP.  
-   5: Entr ALL LED test mode.                                                   ​ +   2: Load system code then write to Flash via TFTP.  
-   6: Entr Web failsafe mode.                                                   ​ +   3: Boot system code via Flash (default). 
-   7: Load Boot Loader code then write to Flash via Serial. ​                    ​ +   4: Entr boot command line interface. 
-   9: Load Boot Loader code then write to Flash via TFTP.                       ​ +   5: Entr ALL LED test mode. 
-   ​                                                                              +   6: Entr Web failsafe mode. 
-                                                                                 +   7: Load Boot Loader code then write to Flash via Serial.  
-  3: System Boot system code via Flash. ​                                          ​ +   9: Load Boot Loader code then write to Flash via TFTP.  
-  ## Booting image at bc050000 ...                                                 + 0  
-   Image Name:   MIPS OpenWrt Linux-3.18.29 ​                                    ​ +   ​ 
-   Image Type:   MIPS Linux Kernel Image (lzma compressed) ​                      +3: System Boot system code via Flash. 
-   Data Size:    ​1240442 ​Bytes =  1.MB                                         +## Booting image at bc050000 ... 
-   Load Address: 80000000 ​                                                      ​ +   Image Name:   MIPS OpenWrt Linux-3.18.29 
-   Entry Point: ​ 80000000 ​                                                      ​ +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
-   ​Verifying Checksum ... OK                                                     +   Data Size:    ​1150305 ​Bytes =  1.MB 
-   ​Uncompressing Kernel Image ... OK                                             +   Load Address: 80000000 
-  No initrd ​                                                                      ​ +   Entry Point: ​ 80000000 
-  ## Transferring control to Linux (at address 80000000) ...                       +   ​Verifying Checksum ... OK 
-  ## Giving linux memsize in MB, 128                                               +   ​Uncompressing Kernel Image ... OK 
-                                                                                 +No initrd 
-  Starting kernel ...                                                             ​ +## Transferring control to Linux (at address 80000000) ... 
-                                                                                 +## Giving linux memsize in MB, 128 
-  [    0.000000] Linux version 3.18.29 (mango@localhost) (gcc version 4.8.3 (Open7 + 
-  [    0.000000] Board has DDR2                                                   ​ +Starting kernel ... 
-  [    0.000000] Analog PMU set to hw control ​                                    ​ + 
-  [    0.000000] Digital PMU set to hw control ​                                    +[    0.000000] Linux version 3.18.29 (mango@mangodeMBP.lan) (gcc version 4.8.3 (OpenWrt/​Linaro GCC 4.8-2014.04 r49378) ) #7 Mon Aug 20 18:37:41 CS8 
-  [    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2                             +[    0.000000] Board has DDR2 
-  [    0.000000] bootconsole [early0] enabled ​                                    ​ +[    0.000000] Analog PMU set to hw control 
-  [    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) ​                          +[    0.000000] Digital PMU set to hw control 
-  [    0.000000] MIPS: machine is Widora-NEO                                       +[    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2 
-  [    0.000000] Determined physical RAM map:                                     ​ +[    0.000000] bootconsole [early0] enabled 
-  [    0.000000] ​ memory: 08000000 @ 00000000 (usable) ​                            +[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) 
-  [    0.000000] Initrd not found or empty - disabling initrd ​                    ​ +[    0.000000] MIPS: machine is WIDORA-NEO 
-  [    0.000000] Zone ranges: ​                                                    ​ +[    0.000000] Determined physical RAM map: 
-  [    0.000000] ​  ​Normal ​  [mem 0x00000000-0x07ffffff] ​                          ​ +[    0.000000] ​ memory: 08000000 @ 00000000 (usable) 
-  [    0.000000] Movable zone start for each node                                 ​ +[    0.000000] Initrd not found or empty - disabling initrd 
-  [    0.000000] Early memory node ranges ​                                        ​ +[    0.000000] Zone ranges: 
-  [    0.000000] ​  ​node ​  0: [mem 0x00000000-0x07ffffff] ​                          +[    0.000000] ​  ​Normal ​  [mem 0x00000000-0x07ffffff] 
-  [    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff] ​                ​ +[    0.000000] Movable zone start for each node 
-  [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. ​  +[    0.000000] Early memory node ranges 
-  [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bys +[    0.000000] ​  ​node ​  0: [mem 0x00000000-0x07ffffff] 
-  [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa2 +[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff] 
-  [    0.000000] Kernel command line: console=ttyS0,​115200 rootfstype=squashfs,​jf2 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
-  [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) ​              +[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
-  [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) ​  ​ +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512 
-  [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) ​    ​ +[    0.000000] Kernel command line: console=ttyS0,​115200 rootfstype=squashfs,​jffs2 
-  [    0.000000] Writing ErrCtl register=0007cff8 ​                                 +[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) 
-  [    0.000000] Readback ErrCtl register=0007cff8 ​                               ​ +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
-  [    0.000000] Memory: ​126004K/131072K available (2727K kernel code, 139K rwdat+[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
-  [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0,​ CPUs=1, Nodes=1 ​      ​ +[    0.000000] Writing ErrCtl register=00043090 
-  [    0.000000] NR_IRQS:​256 ​                                                      +[    0.000000] Readback ErrCtl register=00043090 
-  [    0.000000] intc: using register map from devicetree ​                        ​ +[    0.000000] Memory: ​126272K/131072K available (2544K kernel code, 124K rwdata, 520K rodata, 196K init, 185K bss, 4800K reserved
-  [    0.000000] CPU Clock: 580MHz ​                                                +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0,​ CPUs=1, Nodes=1 
-  [    0.000000] clocksource_of_init:​ no matching clocksources found               +[    0.000000] NR_IRQS:​256 
-  ​[ ​   0.000000] Console: colour dummy device 80x25                                +[    0.000000] intc: using register map from devicetree 
-  ​[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) ​          +[    0.000000] CPU Clock: 580MHz 
-  [    0.060000] pid_max: default: 32768 minimum: 301                             ​ +[    0.000000] clocksource_of_init:​ no matching clocksources found 
-  [    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) ​      +[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) 
-  [    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)  +[    0.060000] pid_max: default: 32768 minimum: 301 
-  [    0.070000] pinctrl core: initialized pinctrl subsystem ​                      +[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
-  [    0.080000] NET: Registered protocol family 16                               ​ +[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
-  [    0.100000] mt7621_gpio 10000600.gpio:​ registering 32 gpios                   +[    0.070000] pinctrl core: initialized pinctrl subsystem 
-  [    0.110000] mt7621_gpio 10000600.gpio:​ registering 32 gpios                   +[    0.080000] NET: Registered protocol family 16 
-  [    0.110000] mt7621_gpio 10000600.gpio:​ registering 32 gpios                   +[    0.100000] mt7621_gpio 10000600.gpio:​ registering 32 gpios 
-  ​[ ​   0.120000] vgaarb: loaded ​                                                   +[    0.110000] mt7621_gpio 10000600.gpio:​ registering 32 gpios 
-  ​[    0.120000] Switched to clocksource MIPS                                     ​ +[    0.110000] mt7621_gpio 10000600.gpio:​ registering 32 gpios 
-  [    0.130000] NET: Registered protocol family 2                                 +[    0.120000] Switched to clocksource MIPS 
-  [    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) ​  +[    0.120000] NET: Registered protocol family 2 
-  [    0.140000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) ​        ​ +[    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
-  [    0.140000] TCP: Hash tables configured (established 1024 bind 1024)         ​ +[    0.130000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
-  [    0.150000] TCP: reno registered ​                                            ​ +[    0.140000] TCP: Hash tables configured (established 1024 bind 1024) 
-  [    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes) ​              ​ +[    0.140000] TCP: reno registered 
-  [    0.160000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) ​          +[    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes) 
-  [    0.170000] NET: Registered protocol family 1                                 +[    0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
-  [    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes) ​            +[    0.160000] NET: Registered protocol family 1 
-  [    0.190000] squashfs: version 4.0 (2009/​01/​31) Phillip Lougher ​              ​ +[    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes) 
-  [    0.190000] jffs2: version 2.2 (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c). +[    0.180000] squashfs: version 4.0 (2009/​01/​31) Phillip Lougher 
-  [    0.200000] msgmni has been set to 246                                       ​ +[    0.190000] jffs2: version 2.2 (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc
-  [    0.220000] io scheduler noop registered ​                                    ​ +[    0.200000] msgmni has been set to 246 
-  [    0.230000] io scheduler deadline registered (default) ​                      ​ +[    0.210000] io scheduler noop registered 
-  [    0.230000] drivers/​phy/​phy-ralink-usb.c:​ralink_usb_phy_probe[336] ​          ​ +[    0.210000] io scheduler deadline registered (default) 
-  [    0.240000] drivers/​phy/​phy-ralink-usb.c:​ralink_usb_phy_probe[350] ​          ​ +[    0.220000] drivers/​phy/​phy-ralink-usb.c:​ralink_usb_phy_probe[336] 
-  [    0.250000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled ​        ​ +[    0.220000] drivers/​phy/​phy-ralink-usb.c:​ralink_usb_phy_probe[350] 
-  [    0.250000] console [ttyS0] disabled ​                                        ​ +[    0.230000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled 
-  [    0.260000] 10000c00.uartlite:​ ttyS0 at MMIO 0x10000c00 (irq = 28, base_baudA +[    0.240000] console [ttyS0] disabled 
-  [    0.270000] console [ttyS0] enabled ​                                          +[    0.240000] 10000c00.uartlite:​ ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A 
-  [    0.270000] console [ttyS0] enabled ​                                          +[    0.250000] console [ttyS0] enabled 
-  [    0.270000] bootconsole [early0] disabled ​                                    +[    0.250000] console [ttyS0] enabled 
-  [    0.270000] bootconsole [early0] disabled ​                                    +[    0.260000] bootconsole [early0] disabled 
-  [    0.280000] 10000d00.uart1:​ ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = A +[    0.260000] bootconsole [early0] disabled 
-  [    0.290000] 10000e00.uart2:​ ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = A +[    0.270000] 10000d00.uart1:​ ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A 
-  [    0.300000] spi-mt7621 10000b00.spi:​ sys_freq: 193333333 ​                    ​ +[    0.280000] 10000e00.uart2:​ ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A 
-  [    0.310000] m25p80 spi32766.0: ​found mx25l12805d,​ expected w25q128 ​           +[    0.290000] spi-mt7621 10000b00.spi:​ sys_freq: 193333333 
-  [    0.320000] m25p80 spi32766.0: mx25l12805d ​(16384 Kbytes) ​                    +[    0.300000] m25p80 spi32766.0: ​w25q256 ​(32768 Kbytes) 
-  [    0.320000] m25p80 spi32766.0: using chunked io                               +[    0.300000] m25p80 spi32766.0: using chunked io 
-  [    0.330000] 4 ofpart partitions found on MTD device spi32766.0 ​              ​ +[    0.310000] 4 ofpart partitions found on MTD device spi32766.0 
-  [    0.330000] Creating 4 MTD partitions on "​spi32766.0": ​                      ​ +[    0.310000] Creating 4 MTD partitions on "​spi32766.0":​ 
-  [    0.340000] 0x000000000000-0x000000030000 : "​u-boot" ​                        ​ +[    0.320000] 0x000000000000-0x000000030000 : "​u-boot"​ 
-  [    0.350000] 0x000000030000-0x000000040000 : "​u-boot-env" ​                    ​ +[    0.320000] 0x000000030000-0x000000040000 : "​u-boot-env"​ 
-  [    0.350000] 0x000000040000-0x000000050000 : "​factory" ​                        +[    0.330000] 0x000000040000-0x000000050000 : "​factory"​ 
-  [    0.360000] 0x000000050000-0x000001000000 ​: "​firmware" ​                      ​ +[    0.340000] 0x000000050000-0x000002000000 ​: "​firmware"​ 
-  [    0.390000] 2 uimage-fw partitions found on MTD device firmware ​              +[    0.400000] 2 uimage-fw partitions found on MTD device firmware 
-  [    0.400000] 0x000000050000-0x00000017edba ​: "​kernel" ​                        ​ +[    0.410000] 0x000000050000-0x000000168da1 ​: "​kernel"​ 
-  [    0.4100000x00000017edba-0x000001000000 ​: "​rootfs" ​                        ​ +[    0.4200000x000000168da1-0x000002000000 ​: "​rootfs"​ 
-  [    0.410000] mtd: device 5 (rootfs) set to be root filesystem ​                ​ +[    0.420000] mtd: device 5 (rootfs) set to be root filesystem 
-  [    0.420000] 1 squashfs-split partitions found on MTD device rootfs ​          ​ +[    0.430000] 1 squashfs-split partitions found on MTD device rootfs 
-  [    0.4200000x000000640000-0x000001000000 ​: "​rootfs_data" ​                    +[    0.4400000x000000620000-0x000002000000 ​: "​rootfs_data"​ 
-  [    0.430000fbtft_of_valuebuswidth = 8                                      +[    0.450000ralink_soc_eth 10100000.ethernet eth0ralink at 0xb0100000, irq 5 
-  [    0.440000fbtft_of_value:​ rotate = 0                                        +[    0.460000mt7621_wdt 10000100.watchdogInitialized 
-  [    0.440000] fbtft_of_valuefps = 10                                          +[    0.470000] TCP: cubic registered 
-  [    0.440000] fbtft_of_value:​ txbuflen = 16                                     +[    ​0.470000] NET: Registered protocol family 17 
-  [    1.230000] Console: switching to colour frame buffer device 16x20            +[    ​0.480000] bridge: automatic filtering via arp/​ip/​ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this
-  [    1.240000] graphics fb0: fb_st7735r frame buffer, 128x160, 40 KiB video memz +[    ​0.490000] 8021q: 802.1Q VLAN Support v1.8 
-  [    1.260000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq5 +[    ​0.500000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 
-  [    1.270000] TCP: cubic registered ​                                            +[    ​0.510000] Freeing unused kernel memory: ​196K (8031f000 ​80350000
-  [    ​1.270000] NET: Registered protocol family 17                               ​ +[    ​1.770000] init: Console is alive 
-  [    ​1.280000] bridge: automatic filtering via arp/​ip/​ip6tables has been deprec+[    1.780000] init: - watchdog - 
-  [    ​1.290000] 8021q: 802.1Q VLAN Support v1.8                                   +[    4.110000] usbcore: registered new interface driver usbfs 
-  [    ​1.300000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.  +[    4.120000] usbcore: registered new interface driver hub 
-  [    ​1.310000] Freeing unused kernel memory: ​212K (8035b000 ​80390000        ​ +[    4.120000] usbcore: registered new device driver usb 
-  [    ​2.560000] init: Console is alive                                           ​ +[    4.130000] reg_opt_init 
-  [    4.910000] usbcore: registered new interface driver usbfs                   ​ +[    4.140000] exFAT: Version 1.2.9 
-  [    4.920000] usbcore: registered new interface driver hub                     ​ +[    4.180000] SCSI subsystem initialized 
-  [    4.920000] usbcore: registered new device driver usb                         +[    4.190000] ehci_hcd: USB 2.0 '​Enhanced'​ Host Controller (EHCI) Driver 
-  [    4.930000] reg_opt_init ​                                                    ​ +[    ​4.200000] ehci-platform:​ EHCI generic platform driver 
-  [    4.940000] exFAT: Version 1.2.9                                             ​ +[    ​4.370000] U2PHY P0 set SRCTRL calibration value: ​7 
-  [    4.980000] SCSI subsystem initialized ​                                      ​ +[    ​4.370000] ehci-platform 101c0000.ehci:​ EHCI Host Controller 
-  [    4.990000] ehci_hcd: USB 2.0 '​Enhanced'​ Host Controller (EHCI) Driver ​      ​ +[    ​4.380000] ehci-platform 101c0000.ehci:​ new USB bus registered, assigned ​bus number 1 
-  [    ​5.000000] ehci-platform:​ EHCI generic platform driver ​                      +[    ​4.380000] ehci-platform 101c0000.ehci:​ irq 26, io mem 0x101c0000 
-  [    ​5.160000] U2PHY P0 set SRCTRL calibration value: ​6                          +[    ​4.410000] ehci-platform 101c0000.ehci:​ USB 2.0 started, EHCI 1.00 
-  [    ​5.160000] ehci-platform 101c0000.ehci:​ EHCI Host Controller ​                +[    ​4.410000] hub 1-0:1.0: USB hub found 
-  [    ​5.170000] ehci-platform 101c0000.ehci:​ new USB bus registered, assigned ​bu1 +[    ​4.420000] hub 1-0:1.0: 1 port detected 
-  [    ​5.170000] ehci-platform 101c0000.ehci:​ irq 26, io mem 0x101c0000 ​          ​ +[    ​4.420000] ohci_hcd: USB 1.1 '​Open'​ Host Controller (OHCI) Driver 
-  [    ​5.200000] ehci-platform 101c0000.ehci:​ USB 2.0 started, EHCI 1.00           +[    ​4.430000] ohci-platform:​ OHCI generic platform driver 
-  [    ​5.200000] hub 1-0:1.0: USB hub found                                       ​ +[    ​4.440000] ohci-platform 101c1000.ohci:​ Generic Platform OHCI controller 
-  [    ​5.210000] hub 1-0:1.0: 1 port detected ​                                    ​ +[    ​4.440000] ohci-platform 101c1000.ohci:​ new USB bus registered, assigned ​bus number 2 
-  [    ​5.210000] ohci_hcd: USB 1.1 '​Open'​ Host Controller (OHCI) Driver ​          ​ +[    ​4.450000] ohci-platform 101c1000.ohci:​ irq 26, io mem 0x101c1000 
-  [    ​5.220000] ohci-platform:​ OHCI generic platform driver ​                      +[    ​4.520000] hub 2-0:1.0: USB hub found 
-  [    ​5.230000] ohci-platform 101c1000.ohci:​ Generic Platform OHCI controller ​    +[    ​4.520000] hub 2-0:1.0: 1 port detected 
-  [    ​5.240000] ohci-platform 101c1000.ohci:​ new USB bus registered, assigned ​bu2 +[    ​4.540000] MTK MSDC device init. 
-  [    ​5.240000] ohci-platform 101c1000.ohci:​ irq 26, io mem 0x101c1000 ​          ​ +[    ​4.580000] mtk-sd: MediaTek MT6575 MSDC Driver 
-  [    ​5.310000] hub 2-0:1.0: USB hub found                                       ​ +[    ​4.580000] sdhci: Secure Digital Host Controller Interface driver 
-  [    ​5.310000] hub 2-0:1.0: 1 port detected ​                                    ​ +[    ​4.590000] sdhci: Copyright(c) Pierre Ossman 
-  [    ​5.330000] MTK MSDC device init.                                             +[    ​4.590000] sdhci-pltfm:​ SDHCI platform and OF driver helper 
-  [    ​5.370000] mtk-sd: MediaTek MT6575 MSDC Driver ​                              +[    ​4.600000] usbcore: registered new interface driver usb-storage 
-  [    ​5.370000] sdhci: Secure Digital Host Controller Interface driver ​          ​ +[    ​4.840000] init: - preinit - 
-  [    ​5.380000] sdhci: Copyright(c) Pierre Ossman ​                                +[    ​5.440000] rt305x-esw 10110000.esw:​ link changed 0x00 
-  [    ​5.380000] sdhci-pltfm:​ SDHCI platform and OF driver helper ​                ​ +[    ​5.620000] random: procd urandom read with bits of entropy available 
-  [    ​5.390000] usbcore: registered new interface driver usb-storage ​            ​ +Press the [f] key and hit [enter] to enter failsafe mode 
-  [    ​5.630000] init: - preinit -                                                 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
-  [    ​6.240000] rt305x-esw 10110000.esw:​ link changed 0x00                       ​ +[    ​8.870000] mount_root: loading kmods from internal overlay 
-  [    ​6.370000] random: procd urandom read with 10 bits of entropy available ​    ​ +   9.220000] block: attempting to load /​etc/​config/​fstab 
-  Press the [f] key and hit [enter] to enter failsafe mode                         +   9.220000] block: ​unable to load configuration (fstabEntry not found
-  Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level     +   9.230000] block: ​no usable configuration 
-  [    ​9.680000] mount_root: loading kmods from internal overlay ​                  +   9.240000mount_rootjffs2 not ready yet, using temporary tmpfs overlay 
-    10.090000] jffs2: notice: (456) jffs2_build_xattr_subsystem:​ complete build. +   9.260000procd- early - 
-  [   ​10.110000] block: attempting to load /​tmp/​jffs_cfg/​upper/​etc/​config/​fstab ​  ​ +   9.270000] procd: - watchdog ​
-    10.120000] block: ​extroot: not configured ​                                   +   9.970000] procd: - ubus - 
-  [   ​10.210000] jffs2: notice: (453jffs2_build_xattr_subsystem:​ complete build. +[   11.000000] procd: - init - 
-    10.470000] block: ​attempting to load /​tmp/​jffs_cfg/​upper/​etc/​config/​fstab ​   +Please press Enter to activate this console. 
-    10.480000block: extroot: not configured ​                                   +[   12.030000] NET: Registered protocol family 10 
-    10.480000mount_rootswitching to jffs2 overlay ​                           +[   12.110000] ip6_tables: (C) 2000-2006 Netfilter Core Team 
-    10.510000] procd: - early                                                 ​ +[   12.130000] i2c /dev entries driver 
-    11.270000] procd: - ubus -                                                   +[   12.330000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(Jul 24 2018 11:42:54)
-  [   12.280000] procd: - init -                                                   +[   12.370000] i2c-mt7621 ​10000900.i2c: ​clock 100 kHz 
-   ​Please press Enter to activate this console. ​                                    +[   12.400000] Linux video capture interface: v2.00 
-  [   13.310000] NET: Registered protocol family 10                               ​ +[   12.430000] Enable Ralink GDMA Controller Module  
-  [   13.390000] ip6_tables: (C) 2000-2006 Netfilter Core Team                     +[   12.440000] GDMA IP Version=3 
-  [   13.410000] i2c /dev entries driver ​                                          +[   12.480000] *******Enter codec_wm8960_i2c_probe******** 
-  [   13.610000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(May 17 2017 15:16:06+[   12.490000] soc-audio soc-audio: ASoC: machine MTK APSoC I2S should use snd_soc_register_card(
-  [   13.650000] i2c-ralink ​10000900.i2c: ​loaded ​                                 ​ +[   12.490000] wm8960 0-001a: No platform data supplied 
-  [   13.680000] Linux video capture interface: v2.00                             ​ +[   12.500000] ****** wm8960_preinit ****** 
-  [   13.710000] Enable Ralink GDMA Controller Module ​                            ​ +[   13.010000] soc-audio soc-audio: wm8960-hifi <-> mt76xx-i2s mapping ok 
-  [   13.720000] GDMA IP Version=3 ​                                                +[   13.020000] ip_tables: (C) 2000-2006 Netfilter Core Team 
-  [   13.750000] *******Enter codec_wm8960_i2c_probe******** ​                      +[   13.050000] nf_conntrack version 0.5.0 (1976 buckets, ​7904 max) 
-  [   13.760000] soc-audio soc-audio: ASoC: machine MTK APSoC I2S should use snd_+[   13.110000] usbcore: registered new interface driver uvcvideo 
-  [   13.760000] wm8960 0-001a: No platform data supplied ​                        ​ +[   13.120000] USB Video Class driver (1.1.1) 
-  [   13.770000] ****** wm8960_preinit ****** ​                                    ​ +[   13.140000] xt_time: kernel timezone is -0000 
-  [   14.280000] soc-audio soc-audio: wm8960-hifi <-> mt76xx-i2s mapping ok       ​ +[   13.160000] PPP generic driver version 2.4.2 
-  [   14.290000] ip_tables: (C) 2000-2006 Netfilter Core Team                     ​ +[   13.170000] NET: Registered protocol family 24 
-  [   14.320000] nf_conntrack version 0.5.0 (1972 buckets, ​7888 max)               +ETHMODE 
-  [   14.380000] usbcore: registered new interface driver uvcvideo ​                +
-  [   14.390000] USB Video Class driver (1.1.1) ​                                  ​ +[   18.930000] device eth0 entered promiscuous mode 
-  [   14.420000] xt_time: kernel timezone is -0000                                 +[   18.950000] br-lan: port 1(eth0) entered forwarding state 
-  [   14.440000] PPP generic driver version 2.4.2                                 ​ +[   18.950000] br-lan: port 1(eth0) entered forwarding state 
-  [   14.450000] NET: Registered protocol family 24                               ​ +[   20.950000] br-lan: port 1(eth0) entered forwarding state 
-  [   19.730000] device eth0 entered promiscuous mode                             ​ +[   23.530000] ===================================================== 
-  [   19.790000] br-lan: port 1(eth0) entered forwarding state                     +[   23.530000] Channel 1 : Busy Time = 0, Skip Channel = FALSE 
-  [   19.790000] br-lan: port 1(eth0) entered forwarding state                     +[   23.540000] Channel 2 : Busy Time = 0, Skip Channel = FALSE 
-  [   21.790000] br-lan: port 1(eth0) entered forwarding state                     +[   23.540000] Channel 3 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.920000] ===================================================== ​            +[   23.550000] Channel 4 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.920000] Channel 1 : Busy Time = 21849, Skip Channel = FALSE               +[   23.550000] Channel 5 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.930000] Channel 2 : Busy Time = 11012, Skip Channel = FALSE               +[   23.560000] Channel 6 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.930000] Channel 3 : Busy Time = 8873, Skip Channel = FALSE               ​ +[   23.570000] Channel 7 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.940000] Channel 4 : Busy Time = 5601, Skip Channel = FALSE               ​ +[   23.570000] Channel 8 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.950000] Channel 5 : Busy Time = 8448, Skip Channel = FALSE               ​ +[   23.580000] Channel 9 : Busy Time = 2244, Skip Channel = FALSE 
-  [   23.950000] Channel 6 : Busy Time = 11624, Skip Channel = FALSE               +[   23.580000] Channel 10 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.960000] Channel 7 : Busy Time = 6848, Skip Channel = FALSE               ​ +[   23.590000] Channel 11 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.960000] Channel 8 : Busy Time = 8716, Skip Channel = FALSE               ​ +[   23.590000] Channel 12 : Busy Time = 0, Skip Channel = TRUE 
-  [   23.970000] Channel 9 : Busy Time = 15633, Skip Channel = FALSE               +[   23.600000] Channel 13 : Busy Time = 397, Skip Channel = TRUE 
-  [   23.980000] Channel 10 : Busy Time = 21951, Skip Channel = FALSE             ​ +[   23.610000] ===================================================== 
-  [   23.980000] Channel 11 : Busy Time = 15756, Skip Channel = FALSE             ​ +[   23.610000] Rule 3 Channel Busy time value : Min Channel Busy  ==> Select ​Channel 1  
-  [   23.990000] Channel 12 : Busy Time = 8200, Skip Channel = TRUE               ​ +[   23.620000] Min Channel Busy = 0 
-  [   23.990000] Channel 13 : Busy Time = 4956, Skip Channel = TRUE               ​ +[   23.620000] BW        = 40 
-  [   24.000000] ===================================================== ​            +[   23.650000] |--------------------------------------------------------| 
-  [   24.010000] Rule 3 Channel Busy time value : Min Channel Busy  ==> Select ​Ch  +[   23.660000] |------------Widora wifi driver--version:​1.4-------------| 
-  [   24.010000] Min Channel Busy = 5601                                          ​ +[   23.670000] |Copyright 2016-2018 by WIDORA TECH All rights reserved| 
-  [   24.020000] BW        = 20                                                    +[   23.670000] |       This Driver licensing-only runs on Widora ​HW   
-  [   24.050000] |--------------------------------------------------------| ​      ​ +[   23.680000] |  Found bug? Please contact widora@qq.com , thanks! ​    | 
-  [   24.050000] |------------Widora wifi driver--version:​1.2-------------| ​      ​ +[   23.690000] |--------------------------------------------------------| 
-  [   24.060000] |Copyright 2016-2017 by YuanChenMang. All rights reserved| ​      ​ +[   23.790000] br-lan: port 1(eth0) entered disabled state 
-  [   24.070000] |       This Driver licensing-only runs on Widora! ​      ​      ​ +[   ​23.800000] device eth0 left promiscuous mode 
-  [   24.070000] |  Found bug? Please contact widora@qq.com , thanks! ​    ​| ​      ​ +[   ​23.800000] br-lan: port 1(eth0) entered disabled state 
-  [   24.080000] |--------------------------------------------------------| ​      ​ +[   23.860000] IPv6: ADDRCONF(NETDEV_UP):​ eth0: link is not ready 
-  [   24.860000] device ra0 entered promiscuous mode                               +[   ​23.910000] device eth0 entered promiscuous mode 
-  [   24.860000] br-lan: port 2(ra0) entered forwarding state                     ​ +[   ​23.920000] br-lan: port 1(eth0) entered forwarding state 
-  [   24.870000] br-lan: port 2(ra0) entered forwarding state                     ​ +[   ​23.920000] br-lan: port 1(eth0) entered forwarding state 
-  [   26.870000] br-lan: port 2(ra0) entered forwarding state       ​ +[   ​25.250000] device ra0 entered promiscuous mode 
-   +[   25.250000] br-lan: port 2(ra0) entered forwarding state 
-  BusyBox v1.23.2 (2017-12-14 10:42:59 CST) built-in shell (ash)                   +[   25.260000] br-lan: port 2(ra0) entered forwarding state 
-                                                                                 +[   ​25.920000] br-lan: port 1(eth0) entered forwarding state 
-   ​_       ​___ ​    ​__ ​                                                            ​ +[   26.250000] jffs2_scan_eraseblock():​ End of filesystem marker found at 0x0 
-  | |     / (_)___/ /___  _________ _                                             ​ +[   ​26.300000] jffs2_build_filesystem():​ unlocking the mtd device... done. 
-  | | /| / / / __  / __ \/ ___/ __ `/                                             ​ +[   ​26.300000] jffs2_build_filesystem():​ erasing all blocks after the end marker...  
-  | |/ |/ / / /_/ / /_/ / /  / /_/ /                                               +[   ​27.260000] br-lan: port 2(ra0) entered forwarding state 
-  |__/​|__/​_/​\__,​_/​\____/​_/ ​  ​\__,​_/ ​                                              ​ + 
-   ​----------------------------------------------------- ​                          +Widora login: root 
-   ​CHAOS CALMER (Chaos Calmer, r49378) ​Version:0.1.by mango                      +Password:  
-   ​----------------------------------------------------- ​                          + 
-  ​* 1 1/2 oz Gin            Shake with a glassful ​                               + 
-  ​* 1/4 oz Triple Sec       of broken ice and pour                               +BusyBox v1.23.2 (2018-07-19 19:20:30 CST) built-in shell (ash) 
-  * 3/4 oz Lime Juice       ​unstrained into a goblet                          ​ + 
-  * 1 1/2 oz Orange Juice                                                        + ​_ ​      ​___ ​    __ 
-  * 1 tsp. Grenadine Syrup                                                       +| |     / (_)___/ /___  _________ _ 
-   ​-----------------------------------------------------  ​+| | /| / / / __  / __ \/ ___/ __ `/ 
 +| |/ |/ / / /_/ / /_/ / /  / /_/ / 
 +|__/​|__/​_/​\__,​_/​\____/​_/ ​  ​\__,​_/​ 
 + ​----------------------------------------------------- 
 + CHAOS CALMER (Chaos Calmer, r49378) ​Ver:0.1.8-20180813 ​by WIDORA 
 + ​----------------------------------------------------- 
 +root@Widora:​~#​ [   ​62.360000] random: nonblocking pool is initialized 
 + 150.230000] done. 
 + 150.230000] jffs2: notice: (1418) jffs2_build_xattr_subsystem:​ complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) ​and 0 of 
 + 
 +                                         ​
 </​code> ​             ​ </​code> ​             ​