乐鑫提供了一个make monitor工具来查看运行情况。 基本使用:

  • Ctrl-] 可以退出monitor.
  • 内置了addr2line神器,一旦log中出现0x4xxxxxxx地址,会被自动翻译到代码行。

使用起来非常简单,敲命令进入,下面是完整的启动log:

$ make monitor
GENCONFIG
MONITOR
--- idf_monitor on /dev/cu.SLAB_USBtoUART 115200 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
ets Jun  8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
ets Jun  8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0010,len:4
load:0x3fff0014,len:5404
load:0x40078000,len:0
load:0x40078000,len:12028
entry 0x40078f24
I (45) boot: ESP-IDF v3.0-dev-265-g969f1bb9 2nd stage bootloader
I (45) boot: compile time 16:21:50
I (78) boot: Enabling RNG early entropy source...
I (78) boot: SPI Speed      : 40MHz
I (78) boot: SPI Mode       : DIO
I (88) boot: SPI Flash Size : 16MB
I (101) boot: Partition Table:
I (112) boot: ## Label            Usage          Type ST Offset   Length
I (135) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (158) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (182) boot:  2 factory          factory app      00 00 00010000 00100000
I (205) boot: End of partition table
I (218) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x077b0 ( 30640) map
I (279) esp_image: segment 1: paddr=0x000177d8 vaddr=0x3ffb0000 size=0x02d84 ( 11652) load
I (293) esp_image: segment 2: paddr=0x0001a564 vaddr=0x40080000 size=0x00400 (  1024) load
0x40080000: _iram_start at ??:?
I (302) esp_image: segment 3: paddr=0x0001a96c vaddr=0x40080400 size=0x056a4 ( 22180) load
I (356) esp_image: segment 4: paddr=0x00020018 vaddr=0x400d0018 size=0x263a8 (156584) map
0x400d0018: _flash_cache_start at ??:?
I (524) esp_image: segment 5: paddr=0x000463c8 vaddr=0x40085aa4 size=0x0d234 ( 53812) load
0x40085aa4: prvProcessTimerOrBlockTask at /Users/mango/ESP/esp-idf/components/freertos/./timers.c:466
I (593) esp_image: segment 6: paddr=0x00053604 vaddr=0x400c0000 size=0x00000 (     0) load
I (627) boot: Loaded app from partition at offset 0x10000
I (628) boot: Disabling RNG early entropy source...
I (629) cpu_start: Pro cpu up.
I (640) cpu_start: Starting app cpu, entry point is 0x40080dec
0x40080dec: call_start_cpu1 at /Users/mango/ESP/esp-idf/components/esp32/./cpu_start.c:192
I (0) cpu_start: App cpu up.
I (673) heap_init: Initializing. RAM available for dynamic allocation:
I (693) heap_init: At 3FFAE2A0 len 00001D60 (7 KiB): DRAM
I (712) heap_init: At 3FFB66C0 len 00029940 (166 KiB): DRAM
I (731) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
I (751) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (770) heap_init: At 40092CD8 len 0000D328 (52 KiB): IRAM
I (790) cpu_start: Pro cpu start user code
I (848) cpu_start: Starting scheduler on PRO CPU.
I (191) cpu_start: Starting scheduler on APP CPU.
Hello world!
This is ESP32 chip with 2 CPU cores, WiFi/BT/BLE, silicon revision 0, 16MB external flash
Restarting in 10 seconds...
  • Last modified: 8 months ago
  • (external edit)