差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

air_compile [2019/03/10 22:27]
air_compile [2020/06/14 11:48] (当前版本)
行 1: 行 1:
 +====例如在HelloWorld中编译====
 +<code bash>
 +$ cd ~/ESP/esp-idf/examples/get-started/hello_world
 +$ make
 +.......
 +CC build/wpa_supplicant/src/fast_crypto/fast_aes-wrap.o
 +CC build/wpa_supplicant/src/fast_crypto/fast_crypto_internal-cipher.o
 +CC build/wpa_supplicant/src/fast_crypto/fast_crypto_internal-modexp.o
 +CC build/wpa_supplicant/src/fast_crypto/fast_crypto_internal.o
 +CC build/wpa_supplicant/src/fast_crypto/fast_sha256-internal.o
 +CC build/wpa_supplicant/src/fast_crypto/fast_sha256.o
 +AR build/wpa_supplicant/libwpa_supplicant.a
 +CC build/xtensa-debug-module/eri.o
 +CC build/xtensa-debug-module/trax.o
 +AR build/xtensa-debug-module/libxtensa-debug-module.a
 +LD build/hello-world.elf
 +esptool.py v2.1-beta1
 +To flash all build output, run 'make flash' or:
 +python /Users/mango/ESP/esp-idf/components/esptool_py/esptool/esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 115200 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x1000 /Users/mango/ESP/esp-idf/examples/get-started/hello_world/build/bootloader/bootloader.bin 0x10000 /Users/mango/ESP/esp-idf/examples/get-started/hello_world/build/hello-world.bin 0x8000 /Users/mango/ESP/esp-idf/examples/get-started/hello_world/build/partitions_singleapp.bin
 +将编译好的固件下载到板子中,此处说明一下,推荐使用”make flash”命令烧写固件。强烈不推荐乐鑫的图形界面烧写。
  
 +$ make flash
 +Flashing binaries to serial port /dev/tty.SLAB_USBtoUART (app at offset 0x10000)...
 +esptool.py v2.1-beta1
 +Connecting........_
 +Chip is ESP32D0WDQ6 (revision 0)
 +Uploading stub...
 +Running stub...
 +Stub running...
 +Configuring flash size...
 +Auto-detected Flash size: 16MB
 +Flash params set to 0x0240
 +Compressed 17536 bytes to 10296...
 +Wrote 17536 bytes (10296 compressed) at 0x00001000 in 0.9 seconds (effective 154.4 kbit/s)...
 +Hash of data verified.
 +Compressed 276016 bytes to 165532...
 +Wrote 276016 bytes (165532 compressed) at 0x00010000 in 14.6 seconds (effective 151.4 kbit/s)...
 +Hash of data verified.
 +Compressed 3072 bytes to 82...
 +Wrote 3072 bytes (82 compressed) at 0x00008000 in 0.0 seconds (effective 2189.8 kbit/s)...
 +Hash of data verified.
 +Leaving...
 +Hard resetting...
 +</code>